Tru-Tech Diaphragm Valves are available in Straight Through (On-Off) and Enhanced Weir (Throttling) design. Both these designs are available in MSS SP-88 (long-body) form factor, which is interchangeable with other diaphragm valves, as well as ANSI B16.10 (short-body) which makes it interchangeable with most solid wedge, double disc, and resilient wedge gate valves as well as short pattern plug and ball valves. Diaphragm valves are ideal for corrosive, abrasive, suspended solids, slurries and clean service applications.
Principals
True-Tech Valve
Products
Advantages
- Designed for higher operating pressures than the competition (125 to 200 PSIG)
- Ductile Iron construction, as opposed to cast iron, reduces damage from wear and tear and improves long-term reliability.
- Tru-Tech Valve body and Duo-Flex diaphragm are designed to provide streamlined laminar flow profiles of a Venturi with minimal change in incremental cross sectional area, resulting in minimum pressure drop
- Unique body design results in shorter stroke, reducing diaphragm stress and providing longer life
- By design, Tru-Tech Valves deliver zero fugitive emissions. Additionally, sealed bonnet is also available as an option
- The Duo-Flex diaphragm can easily be replaced in line. The straight through design also facilitates the use of brushes or rods to clean the valve.
- Double-studded diaphragm, v/s single-studded, deliver better seal and longer life
- Standard TGIC Polyester powder coating
- Standard Rising Stem, Travel Stop Nut, and Stem Cover for Manual Valves
- Standard Adjustable Travel Stops on all Pneumatic Actuated Valves
- Standard Adjustable Closing Stops on all Pneumatic Operated Valves
- Wide range of valve body materials, coatings/linings and diaphragm material (See link below for full listing)
Kunkle Valve
Kunkle Valves is a leading manufacturer of quality safety and relief valve products for industrial and commercial applications, including steam, air, liquid (including cryogenics) and non-hazardous gases.Kunkle relief valves are available for ASME Section I, Section IV and Section VIII services with relief capacities certified by the National Board. In addition, Kunkle offers a range of non-code products and each valve, both code and non-code is set, tested, and retested to the customer’s specifications and then sealed at the factory to prevent tampering. Flotech is a Kunkle valve distributor.
Kunkle safety and relief valve products range in size from 1/4-inch NPT through 6-inch flange and are suitable for services ranging from cryogenic to 850°F at set pressures ranging from vacuum to 6,500 psig. They are available in a wide range of materials including Brass, Bronze, Carbon Steel, Stainless Steel, Cast Iron, and Aluminum.BSP threads are available on most sizes. Kunkle Test Reports and Certificates of Compliance are available upon request.
Products
